30 Ton Compactor Pneumatic Road Roller XP303s with Rubber Wheel

• Customization: Available
• After-sales Service: Good Service
• Warranty: 3 Years
• Model NO.: XP303S
• Type: Road Roller
• Working Method: Wheeled
• Axle: Biaxial Dual-Drum
• Grinding Wheel Type: Light Grind
• Compaction Depth: 25cm
• Engine Type: Diesel Engine
• Travel Speed: 13 Km/H
• Centrifugal Force: 40KN, 25 kN
• Certification: EPA, CS, CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Climbing Ability: 20%
• Vibration Frequency: Vibration Frequency
• Drum Diameter: 2300mm
• Engine Model: Sc7h180.2g3
• Transport Package: 20gp/40gp
• Specification: 5015*2530*3470mm
• Trademark: Top Brand
• Origin: China

Product Description

Detailed Photos

 

 

Product Description

XP303 pneumatic tire roller is a large-tonnage pneumatic tire roller produced according to market requirements, which will take pneumatic tires as working device for compacting paved materials. The pneumatic tire roller is mainly applicable for compacting operation of asphalt pavement, foundation layer, secondary foundation layer, dam and filling engineering. It is an ideal set of compacting equipment for building high grade highway, airport, port, dam and industrial construction site.

Performance Characteristics:
* SC7H180.2G3 electronic control diesel engine has the advantages of high reliability, fuel economy and low noise. Its emission should meet standard in national III stage.
* Transmission system comprises torque converter, power shift transmission, drive axle, axle, chain and rear wheel. Adopt torque converter with continuously variable transmission as well as power shift transmission, and make roller have automatic adaptability, improving transmission stability in compaction, and guarantee the diesel engine to normally work under rated condition.
* Dual-circuit brake technology has higher brake effect, fast response speed, short brake distance and higher reliability.
Guarantee safety of the whole machine, and it is particularly applicable for working in mountainous area.
* The machine uses the box type integral frame, each part of the body is designed with access hole and overturned cover board to facilitate maintenance and curing of each component.
* Front four and rear five tires layout is adopted. All tires are installed with scrapers for cleaning adhesive materials on the
tire reads. The grounding specific pressure can be adjusted in the range of 200kPa ~ 470kPa, good compaction uniformity.

Product Parameters

Item		Unit	XP303S
Maximum operating mass		kg	30300
Compaction width		mm	2360
Overlapping of tyres		mm	65
Ground pressure		kPa	200-545
Minimum turning radius		mm	7620
Swing quantity of front wheel		mm	50
Minimum ground clearance		mm	300
Theoretical gradeability		%	20
Wheel base		mm	3840
Travel speed	Gear I	km/h	0-8
	Gear II	km/h	0-17
Engine	Type	-	SC7H180.2G3
	Rated power	kw	132
	Rated speed	r/min	1800
	Rated fuel consumption rate	g/kw.h	≤233
Tyre specification		-	13/80-20
Tyre tread pattern		-	Smooth tread
Number of tyres		-	Front4 rear 5
Length(standard water sprinkler)		mm	4925
Length(standard oil sprinkler)		mm	5015
Width		mm	2530
Height		mm	3470
Diesel tank volume		L	170
Water tank volume		L	650

Our Advantages