180HP Gr180 Gr1803 Motor Grader with Front Shovel and Rear Ripper

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: GR1803
• Certification: ISO
• Condition: New
• Application: Farmland
• Transmission: Hydraulic
• Walking Mode: Wheeled
• Type: Medium-sized Grader
• Name: 180HP Gr180 Gr1803 Motor Grader with Front Shovel
• Model: Gr1803
• Brand: China
• Power: 180HP
• Engine: Diesel
• Weight: 15400kg
• Dimension (Standard): 8900×2625×3420mm
• Ground Clearance (Front Axle): 430mm
• Tread: 2156mm
• Space of Front and Rear Axles: 6219mm
• Forward Velocity: 5,8,11,17,24,38km/H
• Reverse Speed: 5,11,24km/H
• Tractive Effort F=0.75: 39.2n
• Maximum Gradeability: 20%
• Tire Inflation Pressure: 260kpa
• Transport Package: Container
• Specification: 8900× 2625× 3420mm
• Trademark: china brand
• Origin: China
• Package Size: 800.00cm * 250.00cm * 320.00cm
• Package Gross Weight: 145000.000kg

Product Description

Product Description

The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

1. motor grader GR100 adopts diesel engine with large output torque and power reserve coefficient and low fuel consumption.
2. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
3. The drive axle is a dedicated axle.
4. Rear axle main drive is equipped with "NO-SPIN" without self-locking differential.
5. The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
6. The sealed cab is used to configure the air conditioning system. Fully reflects the needs of ergonomics.

Specification

Item			GR1803
Basic parameters	Engine model		SC7H190.1G3
	Rated power/speed		140kW/2000rpm
	Overall dimension (standard)		8900x2625x3420mm
	Total weight (standard)		15400 kg
	Tire specification		17.5-25
	Ground clearance (front axle)		430mm
	Tread		2156mm
	Space of front and rear axles		6219 mm
	Space of middle and rear wheels		1538 mm
Performance parameters	Forward velocity		5/8/11/19/23/38km/h
	Reverse speed		5/11/23km/h
	Tractive effort f=0.75		≥79 kN
	Maximum gradeability		≥25%
	Tire inflation pressure		260kPa
	Working system pressure		20MPa
	Transmission pressure		1.3-1.8Mpa
Working parameters	Maximum steering angle of front wheel		±48°
	Maximum slant angle of front wheel		±17°
	Maximum oscillating angle of front axle		±15°

Company Profile

Packaging & Shipping

After Sales Service

FAQ